| Pneumatic Actuated Ball Valve |
| GS series |
 |
Flanged-end valve for a wide range of pressure and temperature. It’s designed for high temperature steam by choosing an appropriate seat material. Stem seal structure provides excellent durability. | |||
| Connection | J10K J20K flanged, Full bore | |||
| Material | Stainless | |||
| Valve DN | 15 to 80A | |||
| Maximum Pressure in MPa | 2.0 | |||
| Fluids | Water, Oil, Air, Gas, Steam, Chemicals, Slurry | |||
Data |
|
||
 Body |
|
||||
 Ball |
|
||||
 Seat |
|
G:R-PTFE K: PEEK I:API C:R-PEEK M:SUS316+Stellite |
|||
| Stem Seal | R-PTFE | ||||
SCS14A
| W | Cv ( ):V Port |
|||||||||||
DN (  )
|
 Sizing code |
PSO- PSC- |
TAO- TAC- |
PSC |
TAD TAO TAC |
PND/ PS* |
TAD/ TAO&TAC |
|||||
| 15A (-015) |
0 | 03D | 04D | 040 | 159 | 175 | 196 | 40 | 113/190 | 110/249 | 20 | |
| 2 | . | . | 050 | 224 | 170/305 | |||||||
| 20A (-020) |
0 | 03D | 04D | 040 | 161 | 177 | 198 | 50 | 113/190 | 110/249 | 36 | |
| 2 | 04D | . | 050 | 177 | 226 | 170/305 | ||||||
| 25A (-025) |
0 | 04D | 04W | 050 | 189 | 189 | 235 | 60 | 132/279 | 170/305 | 50 | |
| 2 | . | . | 063 | 250 | 170/367 | |||||||
| 32A (-032) |
0 | 04D | 04W | 050 | 193 | 193 | 239 | 70 | 132/279 | 170/305 | 90 | |
| 2 | 063 | 254 | 204/367 | |||||||||
(-040) |
0 | 063 | 204/367 | 120 | ||||||||
| 2 | 080 | 342 | 240/435 | |||||||||
(-050) |
0 | 063 | 204/367 | 220 | ||||||||
| 2 | 080 | 350 | 240/435 | |||||||||
(-065) |
0 | 080 | 352 | 240/435 | 380 | |||||||
| 2 | 100 | 405 | 294/530 | |||||||||
(-080) |
0 | 080 | 359 | 240/435 | 750 | |||||||
| 2 | 100 | 412 | 294/530 | |||||||||
| V15A (V015) |
2 | 050 | (357) | 40 | 170/305 | (4) | ||||||
| V20A (V020) |
2 | 050 | (359) | 50 | 170/305 | (8) | ||||||
| V25A (V025) |
0 | 050 | (368) | 60 | 170/305 | (9) | ||||||
| 2 | 063 | (383) | 204/367 | |||||||||
| V32A (V032) |
0 | 050 | (372) | 70 | 170/305 | (22) | ||||||
| 2 | 063 | . | (387) | 204/367 | ||||||||
(R040) |
0 | 040 | 040 | 050 | 193 | 193 | 239 | 132/279 | 240/435 | 95 | ||
| 2 | 063 | 254 | 204/367 | |||||||||
(R050) |
0 | 063 | 285 | 204/367 | 135 | |||||||
| 2 | 080 | 350 | 240/435 | |||||||||
(R065) |
0 | 063 | 293 | 204/367 | 195 | |||||||
| 2 | 080 | 358 | 240/435 | |||||||||
(R080) |
0 | 080 | 352 | 240/435 | 410 | |||||||
| 2 | 100 | 405 | 294/530 | |||||||||
(R100) |
0 | 080 | 377 | 240/435 | 430 | |||||||
| 2 | 100 | 430 | 294/530 | |||||||||
(R125) |
0 | 100 | 459 | 294/435 | 900 | |||||||
| 2 | 125 | 494 | 366/688 | |||||||||
(R150) |
0 | 125 | 512 | 366/688 | 1360 | |||||||
| 2 | 160 | 558 | 446/838 | |||||||||
| For foreign matter or high viscous service, please consult for actuator selection. *H When using high temp. fluid (over 170°C) , the option for thermal insulation is needed.Please consult us. |
| Inherent flow characteristic | Outside Drawing |
||||||||||||||||||||
 |
|
||||||||||||||||||||
| Seat leakage volume | |||||||||||||||||||||
|
|||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NOTE) Seat material M can also be manufactured at ANSI B16-104 class V. | |||||||||||||||||||||
| Pressure / Temperature Rating | |||||||||||||||||||||
| Seat material G: R-PTFE K: PEEK I:API M: SUS316+Stellite |
|||||||||||||||||||||
 |
|||||||||||||||||||||
| Product Code | |||||||||||||||||||||
|
|||||||||||||||||||||
type |
|||
type |
operation |
||
operation |
|||
| Option | |
| LB: | LS box for open/close signal detection (two-point type) |
| LC: | Electric-pneumatic integrated positioner Limit SW |
| BS: | Speed control with by-pass valve PPS(Double-acting) |
| EP: | Electro-pneumatic positioner |