MG TC10EM CONTROLLER
MG TC10EM
Temperature Controller Modbus – Kích Thước 96x96mm
2 PID Control • Universal Input x2 • Auto-Tuning • Modbus RTU
Bộ điều khiển nhiệt độ TC10EM của MG Co. Nhật Bản – 2 PID controllers (single loop khi remote SP), universal input x2 (T/C, RTD, DC current/voltage), control output x4, discrete input x2 (switch PID bank/mode), clamp-on current sensor x2 cho phát hiện heater đứt/quá dòng. Hiển thị LED 5 chữ số, auto-tuning, Modbus RTU, kích thước 96x96mm, phù hợp tự động hóa, lò sưởi, máy ép, thực phẩm.
Đặc Điểm Nổi Bật
- 2 PID controllers (single loop khi remote SP loop 1)
- Universal input x2: T/C, RTD, DC current/voltage
- Control output x4: MV (0-20mA/0-10V/12V pulse/Relay), PV, alarm (configurable)
- Discrete input x2: switch PID bank/operation mode
- Clamp-on current sensor x2: phát hiện heater đứt/quá dòng
- Chế độ control: Standard PID, heating/cooling (ON/OFF, PID)
- Auto-tuning: Limit cycle method
- Hiển thị LED 5 chữ số, nút bấm mặt trước/PC config
- Modbus RTU (RS-485) cho kết nối PLC/SCADA
- Cách ly 2000VAC, IP65 front panel
Thông Số Kỹ Thuật MG TC10EM
| Thông số | Chi Tiết |
|---|---|
| Input | Universal x2: T/C, RTD, DC current/voltage |
| Output | 4 points: MV (0-20mA/0-10V/12V pulse/Relay), PV, alarm |
| Discrete Input | x2: switch PID bank/mode |
| CT Input | x2: Clamp-on cho heater break/overcurrent |
| Control Mode | Standard PID, heating/cooling (ON/OFF, PID) |
| Auto-Tuning | Limit cycle method |
| Sampling Cycle | 100 msec |
| Control Cycle | 1.0 – 99.9 sec |
| Communication | Modbus RTU (RS-485, half-duplex) |
| Cách Ly | 2000VAC (Pv1-Pv2-CT-Di-Mv-Do-Modbus-power) |
| Nguồn | 100-240VAC (85-264V, 47-66Hz) |
| Kích Thước | 96 x 96 x 108 mm |
| Chứng Nhận | CE, RoHS |
Bạn cần TC10EM cho hệ thống điều khiển nhiệt độ đa kênh?
Liên hệ ASystem ngay để nhận báo giá tốt nhất + datasheet + tư vấn chọn output (A/V/P/R/A1…) phù hợp!
